- Bell-type Suction Cups Ø 40 à 100 mm, CTC Series
-
-
- Presentation
- The CTC Series high-performance bell-type suction cups have been specifically developed to meet the production requirements of applications in the automotive sector. The bell shape of the CTC Series suction cups gives them significant deflection compared to traditional flat suction cups and guarantees better adaptability to the profiles of parts with long lines. The internal stops ensure excellent sliding resistance and allow the gripping of parts without deformation.
The characteristics of the CTC Series suction cups optimize production in all areas of operation.
Extreme resistance to slippage and acceleration.
• Excellent adaptation to convex surfaces and angular shapes.
• High deflection compared to standard flat suction cups due to the
bell shape.
• Anti-slip cleats ensure precise positioning of oily sheets.
• Particularly suitable for use on high-speed presses, for high speeds
and handling of large parts (e.g. body side, roof, doors).
• Deformation-free gripping of thin sheets thanks to central stops.
- Main Advantages
- • 4 diameters for optimal adaptation to each application.
• Excellent resistance to wear and oil thanks to thermoplastic polyurethane (TPU).
• Low weight due to polyamide insert.
• Sealing lips.
• Integrated O-ring seal (male cylindrical G3/8" and square 32 versions).
• Double tightening: 2 flat 22 mm and one hollow hexagonal 6 mm.
- Materials
- SUCTION CUPS
• TPU: Thermoplastic polyurethane, 85 shore A
- High resistance to oils and abrasion.
- Operating temperature from -4° to 212°F (up to 248°F peak).
FITTINGS
• PA: Polyamide filled with fiberglass (PA 6.6 30% FG), (fitting M38G/F38G).
• AL: Aluminum (M38GA/F38GA/C32 Fitting).
• O-ring (for M38G and C32 fittings): NBR Nitrile Blue
- Fittings
- • M38G Male fitting G3/8" (polyamide insert)
• F38G Female fitting G3/8" (polyamide insert)
• C32 Square coupling 32 mm (polyamide fitting and 32mm square in aluminum)
- Branch-specific applications
-
- Types of use
-
-
- liens
- Documentation
-
reference Diameter
ØA (mm)Suction cup stroke
f (mm)Tensile force
Ft (Lbf)material
matThread
ØGCTC40TPUC32 43.5 7.2 15.74 Thermoplastic polyurethane C32 CTC40TPUF38G 43.5 7.2 15.74 Thermoplastic polyurethane F38G CTC40TPUM38G 43.5 7.2 15.74 Thermoplastic polyurethane M38G CTC60TPUC32 64.7 10.9 35.07 Thermoplastic polyurethane C32 CTC60TPUF38G 64.7 10.9 35.07 Thermoplastic polyurethane F38G CTC60TPUM38G 64.7 10.9 35.07 Thermoplastic polyurethane M38G CTC80TPUC32 84.1 14.5 59.8 Thermoplastic polyurethane C32 CTC80TPUF38G 84.1 14.5 59.8 Thermoplastic polyurethane F38G CTC80TPUM38G 84.1 14.5 59.8 Thermoplastic polyurethane M38G CTC100TPUC32 106 18.4 80.03 Thermoplastic polyurethane C32 CTC100TPUF38G 106 18.4 80.03 Thermoplastic polyurethane F38G CTC100TPUM38G 106 18.4 80.03 Thermoplastic polyurethane M38G
